If they are searching PP29105 : 291 GPH, Underwater, Hydroponics, Aquarium, Aquaponics Pump - 16W, 5' Cord
Price:
Technical Information:
Features Jobe's 5001T Houseplant Indoor Fertilizer Food Spikes, 50 Pack Review
- PonicsPumps Sells 7 pump sizes. Click on "PonicPumps" at the top of this page to see them all.
- FLOW RATES: 291 Gallons Per Hour (GPH) @ 0' Lift; 271 GPH @ 1' Lift; 251 GPH @ 2' Lift; 218 GPH @ 3' Lift; 172 GPH @ 4' Lift; 120 GPH @ 5' Lift; 26 GPH @ 6' Lift; Max Lift - 6' 3".
- DIMENSIONS: 3.50" x 2.80" x 3.27".
- 5 FOOT QUALITY CORD: Many pump manufacturers use an inferior quality cord, our highest quality (SJTW) Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
- UL APPROVED: The file number is E329601.
- EPOXY RESIN ENCASEMENT of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
- NEODYMIUM IRON BORON (NdFeB) MAGNETS are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency.
- EASY CLEAN: No tools required to disassemble and clean filter/impeller.
- WATER-LUBRICATED HYDROGENATED NITRILE (HNBR) BEARINGS are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.
- 16 WATTS - 120VAC - 60Hz
- 3 OUTLET ADAPTORS : For 1/2", 5/8" and 3/4" tubing.
- SALT OR FRESH WATER READY!
- ADJUSTABLE INPUT FLOW RATE
- OIL FREE, NO EXPOSED COPPER Safe for fish!
- POLISHED ALUMINUM OXIDE CERAMIC IMPELLER SHAFT insures long pump life. This non-corrodible ceramic shaft is 3 times as hard as stainless steel.
- NO SEAL TO FAIL! Uses wet-rotor design, so no seal to fail that would damage the pump motor.
- LIMITED WARRANTY: 1 Year, only when sold by NicheNOVA.
Related Products PP29105 : 291 GPH, Underwater, Hydroponics, Aquarium, Aquaponics Pump - 16W, 5' Cord Review
Related Products
-
Tetra Pond Tubing, Smooth Surface, 1/2 Inch x 15 Feet -
Water Fountain Spray Heads/Nozzles for Pond - Set of 4 -
PP12005 : 120 GPH, Submersible, Hydroponics, Aquaponics, Statuary Pump - 6W -
Hydrofarm Air Pump 2 Outlets 3W 7.8L/min -
TotalPond V16010 1/2-Inch by 20-Foot Diameter Flexible Vinyl Pond Tubing
Do not miss! They offer the best PP29105 : 291 GPH, Underwater, Hydroponics, Aquarium, Aquaponics Pump - 16W, 5' Cord for sale now with special price for today. We offer you the best deal for online Sh0pping in USA. You Review PP29105 : 291 GPH, Underwater, Hydroponics, Aquarium, Aquaponics Pump - 16W, 5' Cord now get fast delivery directly from amaz0n.
Product Description
HOW TO CHOOSE A HYDROPONIC, AQUAPONIC, ALGAPONIC, AQUARIUM, POND OR FOUNTAIN PUMP First remember:
- "Maximum Flow Rate" is meaningless because it is at ZERO lift.
- "Maximum Head/Lift" is meaningless because the flow at that height is only a trickle.
You need to choose an affordable quality pump that produces the "desired flow at your required lift" at the lowest wattage.
Step 1: Determining Desired Flow Rate
Hydroponic Systems - typically flow through a single loop allowing a single pump and need a flow rate near 100 GPH for each grow bed loop up to 120 feet. Flood/drain beds - need 2 to 4 cycles per hour. Fish tanks - need a least one exchange per hour or extra oxygenation. Waterfalls - need 100 GPH for each inch of width.
Step 2: Calculating System Lift
Measure the "vertical distance" from the "top" of the water in the pump tank to the pump discharge point.
Step 3: Pump Selection Considerations
- Continuous instead of intermittent pump duty cycle greatly increases pump life, plus no need for a timer or level control.
Tag :
Tidak ada komentar:
Posting Komentar